APlusLift HW-10KOH 10000LB 2-Post Heavy Duty Over Head Car Lift Auto Truck Hoist

New Installation Manual! 24 Months Parts Warranty!
Combo (Symmetrical and Asymmetrical) Arm Assembly with Screw-in Pads!
CE Certified Lift Structure and Hydraulic System
6’9″ Lift Height Maximum with Truck Adapters
Durable Powder Coated Finish on Steel
All Robot Welded Structure
Double Seal Rings Protecting PU Material
Carriage Material Q355, Stronger Than Normal Q235 Steel
Contact:
1-800
.616
.
9618
(phone call) or
1-425
.
300
.
2600
(text)
Free shipping to commercial address (in a business zone) with forklift or freight terminal (Text/Call us for terminal locations. No additional charge when picking up from terminals).
Residential (addresses in a non-business zone): +$50. Additional charges may apply for addresses in remote areas or high cost delivery areas. No delivery inside a building or to a backyard. Text/call us for additional freight to AK, HI, PR, and Canada.
Sorry we do not provide liftgate service, as car lift package is too long to use liftgate.
Each shipment has a tracking number. Please note that delivery time is estimated but not guaranteed.
Full Details of the Product Can Be Found on Manufacturer’s Website.
APlusLift HW-10KOH-A car lift (auto hoist) is one of the most affordable overhead car lifts built with quality materials and good workmanship. The lift has a strong double “S” column design to support 10,000 LB capacity. It is upgraded with thicker steel for stronger support (Column Steel upgraded to 13/64″ from 11/64″; Carriage and Arm Steel upgraded to 15/64″ from 3/16″; Carriage yoke upgraded to 9/16″ from 15/64″)
We confidently offer a 2 years warranty for all the lift parts. This lift, especially the cylinder sealing parts, will last for a long time. We have all replacement and optional parts available. And we welcome suggestions to improve our products and service!
All warranty and repair parts are available.
Please Note We Are The Only Seller of APlusLift Products on eBay.
Specification and Features
Heavy Duty Design:
Column Steel Thickness: 13/64″
Carriage Steel Thickness: 15/64″
Arm Steel Thickness: 15/64″
Carriage Yoke Thickness: 5/16″
Base Plate Steel Thickness: 5/8″
Driving Mode: Dual hydraulic cylinders, chain drive
Lifting Capacity: 10,000 LB
Combo (Symmetrical and Asymmetrical) Arm Assembly:
Straight Front/Rear 3 Stage reach from 22 7/8″ to 42 5/8″
Straight Rear 2 Stage reach from 33 5/8″ to 52 7/8″
Screw-in pads 4 pieces included
Truck adapters 4 pieces included
Safety Mechanism:
Double point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8″ diameter cable and 5″ pulley that reduce high stress on synchronization process and increase cable life
Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Control System:
Lifting operation by pressing “UP” button on motor
Manual lowering operation by pressing lever
Relief valve built in power pump to prevent overloading
Overall Height: 143 3/16″
Overall Width: 134 5/16″
Minimum Height of Arm Top: 4″
Maximum Lift height with Truck Adapters: 81″
Maximum Lift height without Truck Adapters: 75″
Carriage to Carriage Width (Drive through clearance): 100″
Column to Column Width: 109″
Column Cross Section: 11″L x 7″W
Time to full rise: 50 sec
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Concrete Requirement: 6″ thick at 3500 psi reinforced with fiberglass or steel (4″ thick for vehicles 9000LB and below)
Anchor bolts/mounting hardware included
Tool trays and toe guards included
Shipping Weight: 1,450 LB
Shipping package size: 113″L x 22″W x 40″H
Installation Manual
Policies
Shipping
We usually ship in 3 business days after payment.
All our products are shipped with tracking numbers.
For products less than 150 LB, we use FedEx or UPS shipping services.
For products over 150 LB (for example, car lifts or motorcycle lift tables), we use established LTL freight companies for freight services. It usually takes about one week to mid-west and about one and half week to east coast. Please understand that freight time is not comparable to UPS or Fedex shipping services for lifts. Lifts weights over 500 LB but FedEx and UPS shipping services accept packages up to 150 LB.
Sorry we do not ship to a P.O. Box.
Payment
We accept PayPal, credit card, or check payments.
If there is a problem with your payment, please contact us ASAP.
Technical Issues and Feedback
Customer satisfaction is most important to us.
If you have any problem with the product you received, please contact us ASAP. We will do our best to resolve your problem quickly.
We do warranty for parts only. There is no labor warranty on any products.
We ship replacement parts for free within the warranty time. Please let us know if you have any problem with parts.
If you are happy with our products, please leave us a positive feedback. We will leave a positive feedback for you in return once we receive your feedback.
Please to contact us if you want to purchase additional parts.