Rotary lift n342 Seal Kit hydraulic cylinder kit Pacoma cylinders N342-12 seals

!Call our customer service hotline
@
866-902-6060
if you need help identifying which seal kit is best for you or need other parts!
This is 1 seal kit for the hydraulic cylinders found in many
NEWER
Rotary 2 post above
This Kit Rebuilds 1 Cylinder
ground and inground lifts. It fits lifts with capacity
between
7000 – 12000LBS both inground and above ground 2 post lifts
This kit rebuilds  THE NEWEST STYLE Pacoma / Massey Ferguson cylinders that rotary used through MOST RECENT YEARS OF
PRODUCTION.
These seal kits were found in following Rotary models:
SL29-300 , SL29-400 Thru -800 ,
SL212-400 Thru 1000 ,
SPOA7LC-400,
SPOA10-500 ,
SPO10-
500 ,
SPOA7-300 Thru -700 , SPOA9-
300 Thru -700 , SPO9-300 Thru
-700 , SPOA10-300 Thru -700 ,
TLO7-300 Thru
-500 ,
SPO12-310 Thru -710 ,
TLO7 300
Thru -500 , read below for important fitment details
-HOW TO IDENTIFY YOUR CYLINDER IS A
NEW
STYLE
PACOMA CYLINDER AND N342-12 SEALS WILL WORK
-Rotary’s newer style Pacoma cylinders have a large cast screw off type end gland on them (seen in pics 3-6). All the seals for
this cylinder are located in this end gland. (note they may be dark red from being stained with ATF)
–
Approximately
6″ from the bleeder screw on the top of the cylinder there is stampings. The n342-12 seal kit fits the following
rotary part #s stamped in the cylinder casing –
N342 , N382 ,
N343 ,
N346 , N380
*- be sure to verify that the overall stroke of the cylinder is 68″ as this separates this cylinder from other cylinders that were found in these model lifts. (STROKE IS THE DISTANCE THE CYLINDER TRAVELS FROM FULLY COLLAPSED TO FULLY RAISED)
–
If you have your cylinder apart already, compare your end gland seals with the one pictured above.
*If you are still unsure if this seal kit will work for you, call our help hotline at
866-902-6060
and we will be glad to determine what seal kit you need.*
-HOW LONG DOES A REBUILD TAKE??
This kit usually takes less than an hour to install and can be done with a vice, pipe wrench and a few hand tools.
-WHAT THIS KIT WONT’ FIT!
If you see the words PANNI OR YANTI then your cylinder is not a Pacoma and this seal kit will NOT work with your lift but we offers those seal kits as well in our related products section below. If your cylinder stroke (distance the cylinder travels from fully raised to fully colpased) is 71″ then you need a different seal kit which is also available by call 866-902-6060.
CARLIFTPARTS has over 30 years experience in the auto equipment industry and will be glad to help you with all your auto equipment needs or questions !
CALL OUR CUSTOMER SERVICE LINE 866-902-6060
WE OFFER PARTS FOR ALL BRAND AUTO LIFTS, TIRE CHANGERS , BALANCERS , AC MACHINES , PIPE BENDERS ,& BRAKE LATHES
WE ACCEPT ALL MAJOR CREDIT CARDS AND PAYPAL
FLORIDA BUYERS WILL BE CHARGED SALES TAX.
Free shipping applies to 50 US states. Please use shipping price calculator if out of US